Automatic wire cutter and stripping machine is an equipment to strip plastic sheath from metal core of wires. Due to the difference of wire diameter, wire material and composition, there are different suitable models: short small square wire type, large square type, flat ribbon type, sheath cable type, coaxial cable type, etc. The classification of wire stripping machine: intelligent computerized wire stripping machine, high-speed wire stripping machine, automatic wire cutter and stripping machine, electric wire stripping machine, pneumatic wire stripping machine, cable stripping machine, ribbon cable stripping machine, sheath cable stripping machine, coaxial cable stripping machine.
1. Wire feeding roller: conveying wire and stripping wire head. The wire cutter and stripping machine not only strips the head and tail of the wire when stripping the short wire (wire length is less than 50 mm), it also has the function of multi-stage stripping in addition to the wire head.
2. Wire outlet roller: conveying wire and stripping wire tail. (the stripping machine has no effect when stripping short wires, so it is necessary to make the “wire outlet roller lifting knob” at the “U” position).
3. Wire feeding roller clearance adjustment knob: adjust the clearance of wire feeding roller of wire stripping machine, increase the clearance when rotating upward and decrease the clearance when rotating downward (adjust according to the thickness of wire).
4. Pressure adjustment knob of wire feeding roller: adjust the pressure of wire feeding roller of wire cutter and stripping machine. After it pulling out, rotate it clockwise, and the pressure of wire feeding roller will increase. After it pulling out, rotate it anticlockwise, and the pressure of wire feeding roller will decrease. (it is determined according to the strength of insulation, i.e. it is difficult to strip wire, the pressure will increase, otherwise, decrease.)
5. Wire feeding roller lifting knob: when the stripping machine is threading, lift up the wire feeding roller, turn the knob clockwise to lift the wire feeding wheel, so as to smoothly pass through the wire rod; when working, put down the wire feeding roller and turn the knob anticlockwise to put down the wire incoming wheel and press the wire.
6. Clearance adjustment knob of wire outlet roller: it is used to adjust the clearance of wire outlet roller for stripping machine. The clearance increases when it is rotated upward and decreases when it is rotated downward (adjusted according to the thickness of wire rod).
7. Pressure adjustment knob of wire outlet roller: it is used to adjust the wire outlet roller pressure of wire cutter and stripping machine. After it pulling out, the wire outlet roller pressure will increase when it is turned anticlockwise. After it pulling out, it will rotate clockwise, and the pressure of the wire feeding roller will decrease. (it is determined according to the strength of insulation, i.e. it is difficult for the wire stripping machine to strip the wire. If it is difficult, the pressure will increase, and if it is easy, the pressure will decrease.)
8. Wire outlet roller lifting knob: lift the wire outlet roller when taking out the wire, and turn the knob anticlockwise to lift the wire outlet roller so that the wire can be taken out smoothly.When working, put down wire outlet roller, and turn the knob clockwise to put down the wire outlet roller. (when the short stripping procedure is used, the outlet pulley should be raised)
9. Tool holder assembly: it is responsible for wire cutting, head stripping and tail stripping in the wire stripping machine. Under the shutdown state, the upper and lower blades need to be opened to the maximum, so that the wire can pass through the cutter smoothly.
