26
Apr
Next, we will continue to share with you the troubleshooting methods that often occur in the daily practical use of automatic belt loop cutter, and how to deal with a series of fault problems.
1. When using hot cutting, the tape cannot be cut
(1) Check... read more
26
Apr
Next, we will share with you the maintenance methods that often occur in the daily practical use of the roll to sheet cutting machine.
1. The machine keeps cutting, how to deal with no feeding?
(1) Whether the materials are used up, please replace with new... read more
25
Apr
Let’s talk about the advantages of automatic strip cutter:
1. The cutting speed can be adjusted at different speeds for different fabrics.
2. The cutting board of this machine is equipped with a special air flotation blowing device, which can reduce the weight of the cut... read more
29
Apr
The computerized belt loop cutter is composed of a cutter and a knife frame. The knife frame is installed on a base. Its innovation is: a symmetrical vertical mounting plate is fixed on the base, and the mounting plate is vertically guided between the... read more
27
Apr
1. No power supply?
1. Check whether the power connection plug is in good contact? Check whether the fuse is broken?
2. There is power supply, but it cannot be started, the sensor is wrong, the cutter seat sliding sleeve is stuck or there is no... read more
16
Mar
We tell you the solution for no display on the control panel:
If this strip cutter machine is used continuously for a long time, the temperature inside the case may be extremely high, and the display may be abnormal. This is a normal phenomenon. Stop... read more
16
Mar
1. It can automatically cut all kinds of sheet and tube materials, there is a feeding belt wheel installed at the back of the machine, which can be automatically suitable for the disc placement and feeding of strip coils.
2. The high-speed stepping motor accurately... read more
08
Apr
Now the industry is developing very fast, and some machines are often renewed. So let’s see how the pipe cutter develops. With the large-scale use of our company’s automatic silicone tube cutter in the market, more and more customers have different needs. At present, our company’s silicone tube cut to length machines have several models
in accordance with different types of silicone tubes.
The following is an introduction for customers:
1. When choosing cut to length machines (including silicone tube cutters and heat shrinkable tube cutters), customers must choose more professional companies that are well-known in the cutting industry. Fortune Sky has guaranteed after-sales service regardless of product quality (the simplest way to distinguish is whether the company’s website is regular or not, and whether there are many kinds of product cutting equipment, generally speaking, cutting equipment types. Manufacturers with more categories are constantly improving because of more requirements from customers, resulting in more types and more professionals.
2. Choose the price of the automatic silicone tube cutter, of course, you get what you pay for is universal, especially in terms of equipment, after all, it also involves after-sales and maintenance.
3. Customers should choose according to their own needs. For example, if you are in the medical industry, you should choose the silicone tube cutting machine for medical tubes, and the industrial silicone tube cutting machine for industrial silicone tubes.
3. It is very important to use good steel for cutting silicone tube. Generally, the quality of domestic steel is poor, we use imported high-speed steel, durable.
Working principle:
Its principle is to control the direction of oil path movement of hydraulic system by electrical system through the cooperation of computer and hydraulic system, and to promote the straight-line back and forth movement of the trailer. The micro-computer will walk according to the knife-walking route designed by the user. In the round-trip movement, the signals detected from the limit of the trailer board will be used as the basis to control and change the oil-path movement, so as to achieve the desired knife-walking route.
read more
12
Mar
We tell you the solution for no display on the control panel:
If the machine is used continuously for a long time, the temperature inside the case may be extremely high, and the display may be abnormal. This is a normal phenomenon. Stop working, turn... read more
11
Mar
No power supply
1 Check whether the power plug is powered
2 Check whether the power fuse is disconnected There is power, but it cannot be started, and the knife can cut without feeding.
Check whether the feeder motor and the feeder drive are off.
1. Properly adjust... read more
