25
Jun
Even the fully automatic operated fully automatic wire crimping machine can also cause malfunctions and adverse effects, so we often find some bad phenomena in actual operation.
There are main reasons as follow:
One is the unsatisfactory contact of wire terminals. In the final analysis, this is due to the unreasonable design of the corresponding infrastructure or the inconsistent selection of materials, which makes the normal transmission of voltage, current, signal and so on impossible. The other is the problem of poor fixing. The insulator on the terminal is not only to play an insulating role, but also to provide corresponding protection, positioning, fixing and other functions. The reason for poor fixation is actually from design, material selection, process and other factors.
In addition, poor insulation is also one of the common problems of terminals. Because there are some impurities such as metal redundancy, dust and flux on the surface and inside of the insulator of fully automatic wire crimping machine, ionic conductivity will be formed in the case of dampness and mildew, which leads to poor insulation phenomena such as short circuit, low insulation resistance, leakage and breakdown.
What functions does the wire crimping machine can provide?
The fully automatic ribbon cable wire crimping machine is used to connect terminals. It is used to facilitate the connection of wires. It is actually a piece of metal sealed in insulating plastic. Both ends have holes to penetrate the wires. There are screws to fasten or loosen the wires, for example, two wires, sometimes need to be connected, sometimes need to be disconnected. At this time, they can be connected by terminals. And can disconnect at any time, without welding them together or surround them, very convenient and fast. And suitable for a lot of wire interconnection, in the power profession there are special terminal row, terminal box, which is full of terminal, single-layer, double-layer, current, voltage, general, breakable and so on.
Our wire crimping machine has a certain crimping area in order to ensure reliable touch, as well as to ensure that the current can be satisfied. The fully automatic ribbon cable wire crimping machine uses the existing track connection terminal connection skills, and installs a circuit composed of electronic components to complete the transmission coupling of photoelectric process.
read more
12
Apr
1, failure: the length of the different stripping opening;
Reason a: the wire inlet wheel pressed too tight or loose;
Countermeasures: use wire roller fine-tune piece to adjust the gap of wire inlet wheels until the wire won’t be compressed flattened or too loosen slip.
Reason B:... read more
07
Mar
I believe everyone knows the function of fully automatic wire crimping machine and wire crimping machine. Among them, this fully automatic wire crimping machine has many advantages compared with the general wire crimping machine.Compared with the full automatic wire crimping machines in the market, the advantages of... read more
25
Oct
According to statistics, in mechanical factories, accidents caused by machines account for more than 80% of the total accidents. In other words, the proportion of safety accidents caused by human factors is very high. Therefore, safety first has always been the tenet of every... read more
18
Jun
Generally, there are many reasons for overheating of bearings in automatic wire crimping machines. Among them, there are several common reasons. The wire crimping machine manufacturer introduce several reasons as below:
1. Friction between bearing cover and shaft.
Because the axis of the axle and the axis of the mechanical equipment driven by the terminal machine are not on the same line, or because of the inaccurate processing, the inner circle of the bearing cap is eccentric, so that the bearing cap and the axle are friction with each other. Light bearings heat, serious smoke, large high-speed motors will soon rub red. At this time, the machine should be stopped immediately, otherwise the automatic terminal machine will be burnt down.
2. If the belt is too tight or the axle center of the fully automatic wire crimping machine is not in the same straight line as that of the driven machine, that is to say, the bearing load will increase and the bearing will heat up.
3. The unbalance of inner and outer rings of steel ball bearings is one of the causes of heating.
The unbalance of inner and outer rings of terminal machine may be caused by machining. Because the seat and cover of automatic terminal machine are processed separately, sometimes the bearing holes on the two end caps are not coaxial (that is, the center line is not on one line). In addition, poor assembly, uneven tightness of the screw on the end cover, dust and dirt on the stop, etc., may also make the inner and outer rings unbalanced. If the inner and outer rings of the bearing are unbalanced, the steel beads and the inner and outer rings will be scraped, and the friction will increase and heat up. If there is no other reason, wipe the nose clean and reinstall, screw tighten one by one in diagonal order. A small amount of errors in processing can be improved by gradual automatic adjustment.
4. Too much or too little lubricating oil is also the cause of heating.
Bearing is used for a long time, the internal lubricant gradually reduces, resulting in insufficient lubrication, increased friction loss, so that the bearing heating, long-term oil shortage operation will cause bearing damage. Too much oil or too thick oil can also cause bearing overheating. In addition, if the lubricating oil is mixed with hard impurities, the bearings are not cleaned, or the bearings are cleaned with dirty oil, so that there are sand particles and iron chips in the bearings, the mechanical friction of the bearings will be increased and the bearings will be heated, and the bearings will be easily damaged due to the role of impurities.
read more
17
Jun
What causes bad contact of wire crimping machine? For machines, poor contact has always been one of the main causes of failure, from small mobile phones, large computers, larger end-to-end sub-machines or aviation equipment. Since this problem is so important, we must pay attention to it. Let Fortune Sky wire crimping machine manufacturer analyze the bad contact problem of wire crimping machine today.
For a computer, the most common malfunction is the memory chip. For a wire crimping machine, the most common malfunction is the metal conductor inside the terminal. This part is the core part of the terminal. It transmits the voltage, current or signal from external wires or cables to the contacts corresponding to its matching connectors.
Because of its importance, the wire crimping machine is required to have stable and reliable contact and good conductivity. So what factors will cause poor contact of wire crimping machine contact structure?
In fact, this is a common factor, such as excessive processing size, unreasonable surface treatment technology such as heat treatment and plating, poor storage environment, poor and improper use and operation, etc., may make contact parts and coordination parts of automatic wire crimping machine poor contact.
Common fatal faults at terminals?
1. Poor contact
The metal conductor inside the terminal is the core part of the terminal. It transmits the voltage, current or signal from the external wire or cable to the contacts corresponding to its matching connector. Therefore, the contact parts must have excellent structure, stable and reliable contact retention and good conductivity. Due to the unreasonable structure design, wrong material selection, unstable die, excessive processing size, rough surface, unreasonable surface treatment process such as heat treatment and electroplating, improper assembly, poor storage and use environment and improper operation, all of these will cause poor contact at the contact and coordination parts of the contact parts.
2. Poor insulation
The function of insulator is to keep the contacts in the correct position, and to protect the contacts from the contacts and the shells from each other by insulating the conveyor. Therefore, insulators must have excellent electrical performance, conveyor protection mechanical performance and process forming performance. Especially with the wide use of high density and miniaturized terminals, the effective wall thickness of insulators becomes thinner and thinner. This puts forward more stringent requirements for insulation materials, precision of injection moulds and moulding technology. Due to the existence of metal redundancy, surface dust, flux and other contaminations on the surface or inside of insulators, the amalgamation of organic material precipitates and harmful gas adsorption film with surface water film to form ionic conductive channels, moisture absorption, long mold, aging of insulating materials and other reasons, will cause short circuit, leakage, breakdown, low insulation resistance and other bad insulation phenomena.
3. Poor fixation
Insulators not only play an insulating role, but also provide precise centering and protection for extended contacts. They also have the functions of installation, positioning and locking and fixing on equipment. Poor fixing, light impact on contact reliability, resulting in instantaneous power failure, the serious is product disintegration. Disintegration refers to the abnormal separation between plugs and sockets and between pins and sockets caused by unreliable structure due to material, design, process and other reasons, which will result in serious consequences of power transmission and signal control interruption of computer stripper in control system. Due to unreliable design, wrong material selection, improper selection of forming process, poor quality of heat treatment, die, assembly, welding and other processes, inadequate assembly will cause poor fixation.
In addition, due to coating peeling, corrosion, bruising, plastic shell flying edge, rupture, rough contact parts processing, deformation and other reasons caused by poor appearance, due to positioning and locking with poor size, poor consistency of processing quality, total separation force and other reasons caused by poor interchange, is also a common disease, frequently occurring. These kinds of faults can be found and eliminated in time in the process of inspection and use.
read more
25
Oct
Due to COVID-19 in the first half of the year, the world economy has been greatly disturbed. But here, we hope that you can take care of your own safety and health, and strengthen the epidemic prevention work. No matter how bad the social... read more
07
Mar
Fully automatic wire cutting stripping tinning machine must be operated by trained personnel. Operators should be familiar with the general performance and structure of the machine, master the prevention of equipment failure, judgment and emergency treatment measures. Now we will talk about the considerations of automatic wire... read more
22
Jun
The mute wire crimping machine is developed for the common terminal die at home and abroad. It is suitable for the crimping of various terminals and wires. Digital control, safety protection system and simple operation have realized the accuracy, strength and safety that the machinery can not reach. The unique frequency converter technology, safe working time, power saving and mute, the operator is more dedicated to work, greatly improving work efficiency. It is also a wire crimpingl machine widely used nowadays. Today, the manufacturer of wire crimping machine shares the working principle of mute wire crimping machine for you.
The mute wire crimping machine adopts modern frequency converter control technology, which is developed for the common terminal die crimping at home and abroad. It is suitable for the crimping of various terminals and wires. Digital control, safety protection system and simple operation realize the accuracy, strength and safety that the machine can not reach. It can make the terminal machine run supermutely, and the converter itself can save 30% of the power. In addition, the supermute terminal machine is a kind of supermute terminal machine. Working once power on, eliminating unnecessary idle motor, more power-saving. Without noise, workers are more attentive to their work, which greatly improves their work efficiency. This is the preferred equipment for wire end processing.
The mute wire crimping machine is a semi-automatic wire crimping machine. It uses a foot-stepping to start the machine, and step one time to complete a processing action. According to its structure, it can be divided into two types: stepping type and server type. Its working principle is as follows:
1. Stepping wire crimping machine: (stepping principle) The motor keeps turning. There is a breaker with a clutch in the inner core. Every move is a standard “O” coming out, which is the most common.
2. Server wire crimping machine: also known as silent terminal machine, through manual control pedal to the server signal, the signal is transmitted to the motor, motor operation pressure connection, complete a workflow.
Silent terminal machine refers to a kind of machine used in wire processing. It can press the hardware head to the wire end. Then do conduction, mute terminal machine typed out of the terminal is usually to connect more convenient, without welding can be stable to connect the two wires together, and when disassembly only need to pull it out.
read more
25
Oct
1. Turn on the power switch of the automatic cutter stripper wire crimpers, and the power indicator is on.
2. Pay attention to whether there is obvious abnormal noise inside and outside the machine. If yes, immediately stop working, ask the maintenance personnel to determine... read more