Analysis on the problem of poor contact of FRC wire tin dipping machine

For machines, poor contact has always been one of the main causes of failure, ranging from mobile phones, computers, to wire tin dipping machines, aviation equipment, etc. Since this problem is so important, of course, we need to pay attention to it. Today, let’s analyze the problem of poor contact of wire tin dipping machine. For the computer, the memory module is the most common cause of poor contact, while for the wire tin dipping machine, the metal conductor inside [...]

Working principle of main parts of automatic wire cutting and tin dip soldering machine

1. Wire wheel: conveying wire rod and stripping wire head. When stripping short wires, the wire cutting machine can strip both the wire head and the wire tail (the length of the wire is less than 50 mm). When stripping in the process of stripping, the wire cutting machine has the function of stripping the middle part as well as the wire head. 2. Outgoing line wheel: it is used to transport wire rod and strip the outgoing line tail [...]

The reason why the soldering iron head doesn’t stain tin

Electric iron head does not stain tin. People who often use electric iron head at work will always suffer from this? So what’s the reason why the tip of the soldering iron doesn’t stick to tin? In the process of lead-free soldering, sometimes the soldering iron head does not stick to tin. In addition to the quality problems of the iron head itself, the manufacturer of automatic wire cutting and tin dip soldering machine thinks that the causes can [...]

Online Service
Live Chat