Basic knowledge of automatic wire tin dip soldering machine

Automatic wire tin dip soldering machine, three-dimensional and all-round adjustment, so that the soldering iron and solder wire do not need the hands of operator, it completely replaces your hands, the arm can be adjusted to any position you want to weld. What is the basic knowledge of the editor? 1. Automatic tin delivery system: you only need to step on the foot switch, and the solder wire will extend to the soldering iron head automatically, at a fixed speed [...]

Analysis on the problem of poor contact of ribbon cable wire tin dip soldering machine

For machines, poor contact has always been one of the main causes of failure, ranging from mobile phones, computers, to wire tin dip soldering machines, aviation equipment, etc. Since this problem is so important, of course, we need to pay attention to it. Today, let’s analyze the problem of poor contact of wire tin dip soldering machine. For the computer, the memory module is the most common cause of poor contact, while for the wire tin dip soldering machine, the [...]

Working principle of main parts of automatic wire cutting and tin dip soldering machine

1. Wire wheel: conveying wire rod and stripping wire head. When stripping short wires, the wire cutting machine can strip both the wire head and the wire tail (the length of the wire is less than 50 mm). When stripping in the process of stripping, the wire cutting machine has the function of stripping the middle part as well as the wire head. 2. Outgoing line wheel: it is used to transport wire rod and strip the outgoing line tail [...]

The reason why the soldering iron head doesn’t stain tin

Electric iron head does not stain tin. People who often use electric iron head at work will always suffer from this? So what’s the reason why the tip of the soldering iron doesn’t stick to tin? In the process of lead-free soldering, sometimes the soldering iron head does not stick to tin. In addition to the quality problems of the iron head itself, the manufacturer of automatic wire cutting and tin dip soldering machine thinks that the causes can [...]

Common problems of automatic cutting stripping and wire tin dip soldering machine

Wire stripping machine is a kind of machine which can strip the insulation of wire. Due to the different wire diameter, material and composition, there are different suitable models. Wire stripping machine is the most widely used machine in the mechanical industry. People are relying on various mechanical automation in many places. Here are some common problems of automatic cutting stripping and  wire tin dip soldering machine: A. wire insulation crush 1. Properly adjust the gap between the incoming transmission wheel and [...]