Troubleshooting of automatic terminal rail feeding wire crimping machine

  The possible factors of terminal rail feed not working are as follows: 1. Lack of power supply voltage. 2. The connecting wire between the terminal rail feed and the controller is cracked. 3. The fuse of the controller is blown out. 4. The coil is burnt out. 5. The space between coil and framework is too small or too large. 6. Some parts are stuck between the coil and the frame. 7. The terminal rail feed is against hard objects, and the top plate or chassis [...]

How to operate benchtop wire terminator crimping machine?

Benchtop wire terminator crimping machine is developed with modern frequency converter control technology, which is aimed at common terminal applicator crimping at home and abroad. It is suitable for crimping various terminals and wires. Digital control, safety protection system and simple operation realize the accuracy, strength and safety that the machine can not reach. It makes the terminal machine operate supermutely, and the frequency converter itself can save 30% of electricity, plus the super mute wire crimping machine is [...]

Failure Elimination For Automatic Wire Terminating Machine

Failure 1: Stripping front opening length varies. Reason a: Feeding wire wheel is too tight or relaxed; Solution: use wheel trimming bar to adjust two wheels gap so as not to press the wire firmly or too relaxed to slip the wire. Reason b: cutting and stripping knife cut too shallow or too deep; Solution: use knife deep shallow adjust bar to move knife-edge to the appropriate location, in order not to hurt the copper wire and can smooth off the rubber. Reason c: [...]

Online Service
Live Chat