Belt Cutter | Fortune Sky Technologies

What are the installation and debugging steps of the computer tape cutting machine after it is delivered to the factory

We tell you what are the installation and debugging steps of the computer tape cutting machine after it is delivered to the factory. Customers need to install and debug after receiving the computer tape cutting machine before it can be applied. What are the installation and debugging steps of the computer tape cutting machine? 1. Make preparations first, prepare the site, power supply, etc.; 2. Inventory of the received EPE vertical cutting machine accessories; 3. Frame rail; 4. The four feet of the guide [...]

Common faults and solutions of belt loop cutter

Next, we will continue to share with you the troubleshooting methods that often occur in the daily practical use of automatic belt loop cutter, and how to deal with a series of fault problems. 1. When using hot cutting, the tape cannot be cut (1) Check whether the temperature reaches the preset temperature. (2) Check whether the hot knife is heated. 2. No power supply (1) Check whether the power connection plug is in good contact. (2) Check whether the fuse is disconnected. 3. There is [...]