basic operation method of 3F pneumatic cable stripping machine

Operation method of 3F pneumatic cable stripping machine: 1, the air inlet pipe connecting the air supply 4.5-7kg/ 2 cm 2, the power cord plug into the 220V 50Hz power supply 3, the foot switch to make the cylinder action 4, as shown in Figure two, trimming operation key: loosen the nut in middle of headless screw,nut 1 control upper clamp block up and bottom; nut 2 control knife mold up and bottom, with different thickness of wire, the nut turn up (counterclockwise) is [...]

Tell us about the basic structure of 3FN pneumatic core wire stripper twister

3FN pneumatic wire stripper twister  is professional designed and manufactured wire processing equipment for all kinds of electronic wire and double wire with wire twisting stripping function. This utility model has the advantages of low labor cost, high working efficiency, and small and practical effect. 3FN pneumatic wire stripper twister structure: including frame,template, template; template is respectively arranged on the upper and lower knife and wire clamping block,the upper and lower knife seat is connected through a guide column,a frame template are [...]

Do you know how many basic application and adjust methods of pneumatic cable stripping machine?

Do you know how many basic application and adjust methods of pneumatic cable stripping machine? Adjust methods of pneumatic cable stripping machine 1, connect air inlet pipe with air supply 4.5-7kg/sq.cm. 2, plug power cord  into 220V 50Hz power supply. 3, foot switch to make the cylinder action. 4, the use of double-cutters model is basically same as above, design for the wire cutting and stripping in one time. Need to pay attention to the following points: A) without gasket, the gap between cutter and stripping [...]

Online Service
Live Chat