Automated strip cutter machine failure solution

Next, we will continue to share with you the troubleshooting methods that often occur in the daily practical use of the automated strip cutter machine, and how to deal with a series of fault problems of the automated strip cutter machine. 1. When using heat cutting, the tape cannot be cut (1) Check whether the temperature reaches the preset temperature (2) Check whether the hot knife is heated 2. No power supply (1) Check whether the power connection plug is in good contact? (2) Check [...]

Features of automatic cold and hot strip cutting machine

The computer automatic cold and hot strip cutting machine has the following characteristics: 1. The machine tool is made of imported high-quality steel after special treatment. The cut surface is flat during hot cutting, and the hot knife can heat seal the cut surface of various chemical fiber webbing at high temperature, and the seal is flat and free of burrs. There is no need to heat the edge-sealing material, and it can be cut directly without heating. The cold [...]

What are the advantages of the automatic roll to sheet cutting machine?

The automatic roll to sheet cutting machine we produce is suitable for cutting special-shaped and narrow strips of materials such as foam, diffuser, double-sided tape, copper and aluminum foil, saving time and labor, and greatly improving production efficiency. The main advantages are as follows: 1. The design of the equipment is silent, reducing the noise of the working environment. 2. Centralized (outdoor) exhaust to reduce dust and improve the production environment. 3. The equipment is equipped with a self-diagnosis function (when a failure [...]

Automated velcro tape cutter mainly adopts digital automatic operation control system

This automated velcro tape cutter mainly adopts a digital automatic operation control system, which is simple and convenient to operate. The machine can automatically cut after setting the program. The automated velcro tape cutter mainly adopts single or multiple simultaneous cutting according to different materials. The temperature can be adjusted according to different materials, and the speed can be adjusted at will. Mainly adopt microcomputer numerical control device to set cutting length. This hot & cold automatic strip cutting machine [...]

Solution of no display on the control panel of the automated strip cutter

We tell you the solution for no display on the control panel: If the machine is used continuously for a long time, the temperature inside the case may be extremely high, and the display may be abnormal. This is a normal phenomenon. Stop working, turn off the power switch, and turn it on after a while. The display should be normal. If it is in cold state If the boot display is abnormal, please turn off the power and wait [...]

Functional characteristics of automated velcro tape cutter

Fully automatic cutting, simple operation, wide application range, high cutting quality, cold and hot knife can cut. High speed: 80 to 100 pieces can be cut per minute. (Take 50mm length as an example) High precision: each cut is monitored by a stepping motor to ensure high accuracy of each operation. Smooth cut surface: The hot knife can heat seal the cut surface of colored ribbons and light and thin textile belts at high temperature, and the sealing is smooth and free [...]

Working environment of automated velcro tape cutter

The automated velcro tape cutter is composed of a cutter and a knife frame. The knife frame is installed on a base. Its innovation is: a symmetrical vertical mounting plate is fixed on the base, and the mounting plate is vertically guided between the mounting plates. The frame-shaped knife holder is movably installed, the top of the knife holder is horizontally fixed with a cutting knife, and the bottom end of the knife holder is driven by a cam [...]

Reasons for the wear of the cutting knife of the ultrasonic strip cutting machine

The products cut by the ultrasonic strip cutting machine are beautiful and elegant, without fading, cracking, blackening, and yellowing. The grade of the product has been improved a lot, and the profit is better. But why is its cutter so easy to wear? To understand the cause of cutter wear, you must first understand its working principle: Ultrasonic strip cutting machine (ultrasonic cutting machine) is a combination of ultrasonic welding technology and traditional shearing equipment. Its working principle is: when the [...]

Advantages of the strip cutting machine

Let’s talk about the advantages of the strip cutting machine: 1. The cutting speed can be adjusted at different speeds for different fabrics. 2. The cutting board of this machine is equipped with a special air flotation blowing device, which can reduce the weight of the cut piece and the resistance formed by the cutting board, make the piece easy to move, and cut small pieces more accurately. 3. Equipped with a hair hook removing device to eliminate the hair hooks of [...]

Online Service
Live Chat