Automatic wire crimping machine failure reason and eliminations

1, failure: the length of the different stripping opening; Reason a: the wire inlet wheel pressed too tight or loose; Countermeasures: use wire roller fine-tune piece to adjust the gap of wire inlet wheels until the wire won’t be compressed flattened or too loosen slip. Reason B: cutting knife cut too shallow or too deep; Countermeasures: to adjust the depth of the cutting knife to adjust the blade to the appropriate location, so as not to damage the copper wire and smooth off [...]

cable lug terminal crimping machine

Dealing with the common problems of semi-automatic wire terminator

Generally speaking, semi automatic wire terminator in normal work, there are several common problems. One is the poor contact terminals and insulation, as well as poor fixed. 1.) the phenomenon of poor contact the metal conductor inside the terminal is the core part of the terminal, which transfers the voltage, current or signal from the external wire or cable to the corresponding contact part of the connector. Therefore, the structure of the contact must be excellent and stable and reliable, but also [...]