Automated strip cutter machine can automatically cut various belts

1. It can automatically cut all kinds of sheet and tube materials, there is a feeding belt wheel installed at the back of the machine, which can be automatically suitable for the disc placement and feeding of strip coils. 2. The high-speed stepping motor accurately controls the length of the tube cutting, the length and speed of the tape are adjustable. 3. Cutter time protection of the computerized hot & cold strip cutting machine, total number setting; splitting setting,splitting pause time [...]

The equipment characteristics of automated velcro tape cutter

This automated velcro tape cutter is composed of a cutter and a knife frame. The knife frame is installed on a base. Its innovation is: a symmetrical vertical mounting plate is fixed on the base, and the mounting plate is vertically guided between the mounting plates. The frame-shaped knife holder is movably installed. The top of the knife holder is horizontally fixed with a cutting knife. The bottom of the knife holder is driven by a cam mechanism driven [...]

Functional characteristics of automated velcro tape cutter

Fully automatic cutting, simple operation, wide application range, high cutting quality, cold and hot knife can cut. High speed: 80 to 100 pieces can be cut per minute. (Take 50mm length as an example) High precision: each cut is monitored by a stepping motor to ensure high accuracy of each operation. Smooth cut surface: The hot knife can heat seal the cut surface of colored ribbons and light and thin textile belts at high temperature, and the sealing is smooth and free [...]

Working environment of automated velcro tape cutter

The automated velcro tape cutter is composed of a cutter and a knife frame. The knife frame is installed on a base. Its innovation is: a symmetrical vertical mounting plate is fixed on the base, and the mounting plate is vertically guided between the mounting plates. The frame-shaped knife holder is movably installed, the top of the knife holder is horizontally fixed with a cutting knife, and the bottom end of the knife holder is driven by a cam [...]

Common troubleshooting of automated velcro tape cutter

No power supply 1 Check whether the power plug is powered 2 Check whether the power fuse is disconnected There is power, but it cannot be started, and the knife can cut without feeding. Check whether the feeder motor and the feeder drive are off. 1. Properly adjust the screws of the guide rail pressing plate. Note (902L) 2. The manual cutter adjustment function is adopted to align the upper knife and the lower knife and keep them level. Note: If The level is not [...]

Online Service
Live Chat