Troubleshooting of automatic terminal rail feeding wire crimping machine

  The possible factors of terminal rail feed not working are as follows: 1. Lack of power supply voltage. 2. The connecting wire between the terminal rail feed and the controller is cracked. 3. The fuse of the controller is blown out. 4. The coil is burnt out. 5. The space between coil and framework is too small or too large. 6. Some parts are stuck between the coil and the frame. 7. The terminal rail feed is against hard objects, and the top plate or chassis [...]

Applicator adjustment of automatic wire stripper crimper for crimping small wire

Due to COVID-19 in the first half of the year, the world economy has been greatly disturbed. But here, we hope that you can take care of your own safety and health, and strengthen the epidemic prevention work. No matter how bad the social economy is, there is no priority for health and safety. The content is also far away. The following editor will give you a detailed explanation of applicator adjustment method steps of automatic wire stripper crimper [...]

Poor contact of wire terminal crimping machine?

Analysis of poor contact problem of wire terminal crimping machine: For machines, poor contact has always been one of the main causes of failure, ranging from small size like mobile phones to big one like computers, wire terminal crimping machines, or aviation equipment and etc. In fact, this is also some common factors, such as processing size beyond tolerance, unreasonable heat treatment and electroplating surface treatment technology, poor storage environment, improper operation, etc., as mentioned above, it may cause bad [...]

Online Service
Live Chat