basic operation method of 3F pneumatic cable stripping machine

Operation method of 3F pneumatic cable stripping machine: 1, the air inlet pipe connecting the air supply 4.5-7kg/ 2 cm 2, the power cord plug into the 220V 50Hz power supply 3, the foot switch to make the cylinder action 4, as shown in Figure two, trimming operation key: loosen the nut in middle of headless screw,nut 1 control upper clamp block up and bottom; nut 2 control knife mold up and bottom, with different thickness of wire, the nut turn up (counterclockwise) is [...]

Do you know how many basic application and adjust methods of pneumatic cable stripping machine?

Do you know how many basic application and adjust methods of pneumatic cable stripping machine? Adjust methods of pneumatic cable stripping machine 1, connect air inlet pipe with air supply 4.5-7kg/sq.cm. 2, plug power cord  into 220V 50Hz power supply. 3, foot switch to make the cylinder action. 4, the use of double-cutters model is basically same as above, design for the wire cutting and stripping in one time. Need to pay attention to the following points: A) without gasket, the gap between cutter and stripping [...]