Good maintenance will not only increase the service life of the machine, but also make the machine run faster, and there will be fewer problems in the later work. Next, will teach you how to maintain the fully automatic wire tin dip soldering machine:

When choosing a proper fully automatic wire tin dip soldering machine, first of all, the power and type of fully automatic wire tin dip soldering machine should be considered. This is because the specifications of fully automatic wire tin dip soldering machine are different, and there are many kinds. Considering the size of the components to be welded, it is more important to choose a correct fully automatic wire tin dip soldering machine, which will affect the efficiency and quality of welding. The fully automatic wire tin dip soldering machine must be operated correctly when it is working. Before the machine is working, adjust all data according to the components to be welded, so as to avoid unnecessary problems in the later stage. When you do not use the wire tinning machine at ordinary times, you must keep enough tin on the tip of the soldering iron.

The fully automatic wire tin dip soldering machine should clean the furnace regularly. If it is not cleaned for a long time, the impurity content in the furnace will become higher and higher, which will cause excessive discharge of tin slag in the later period and abnormal discharge of tin slag. When cleaning the wave peak furnace, we should clean every part of the furnace. We must pour out all the tin in the furnace and clean it up. After the cleaning work is completed, we should install every part and add a new tin bar to make it work again.

No matter when the fully automatic wire tin dip soldering machine works or in the later maintenance work, it is necessary to actively clean and maintain the machine. Only in this way can the service life of the machine be extended and the machine work more flexibly.

Share this post