09
Apr
Generally speaking, semi automatic wire terminator in normal work, there are several common problems. One is the poor contact terminals and insulation, as well as poor fixed.
1.) the phenomenon of poor contact the metal conductor inside the terminal is the core part of the terminal, which... read more
08
Apr
The clamp of IDC connector crimping machine is adjustable, there are two kinds of specifications, the one with 1.0 maximum spacing can crimp 64P, the one with 1.27 maximum spacing can crimp 50P, 1.0 or 1.27 spacing fixture will be sent with machine at... read more
25
Jun
In order to ensure the safety of the staff, it is necessary to master the correct operation method and pay special attention to it in the use process. Compared with general wire crimping machine, the performance of fully automatic wire crimping machine may be... read more
30
Apr
1. The length of the stripping opening of fully automatic ribbon cable terminating machine is different:
There are many common reasons for opening disagreement, such as wire is pressed too tight or loose by wire feeding wheels; so you only need to adjust the space between the two wheels with a roller trimmer so that the wire does not flatten or slip too loosely. If the cut is too shallow or too deep, let’s adjust the knife edge to the right position with the knife depth conditioner, so as not to hurt the copper wire and to drop the rubber smoothly. If the opening is still different, replace the new blade directly.
2. Copper wire is exposed and uneven while terminating ribbon cable the copper wire :
Check whether the gun-type swing arm catheter can be attached to the wire or not;
Check whether the knife edge of wire crimping machine can be straight with the swing arm catheter or not;
Check whether the auxiliary pressing block of the wire crimping machine can be loosened or not;
Check whether the interval between the terminal machine and the automation has been changed or not.
3. The automatic ribbon cable terminating machine can not start or stop working:
Unable to start or suspend work, first of all, we must check whether there is current input and 6KG air pressure, as well as whether there is wire or a part of the machine jammed or not; and check whether the wire crimping machine has signal or power connection which leads to the machine doesn’t crimp.
4. Wire interception of automatic ribbon cable terminal crimping machine leads to different length:
Change new blade.
Pressure of wire feeding wheels are too tight or loosen, so you only need to adjust the space between the two wheels with a roller trimmer so that the wire does not flatten or slip too loosely.
Matters needs attention in maintenance of automatic ribbon cable terminating machine
In order to prevent accidents or damage to the machine, the following principles must be observed in overhaul:
1. Only trained professionals are allowed to repair machines or replace components. When a fault occurs, press the jerk button on the operation panel to stop the machine.
2. When the machine fails to work properly, consult relevant manuals and instructions to determine the correct measures to be taken.
3. If two or more people work together, they must establish links with each other so that they can inform each other before starting new work steps to ensure personal safety.
4. Many electrical components are installed on the machine. The installation position of these components is vulnerable to oil pollution, dust and vibration.
A large part of the machine failure is caused by these components. Because the operation and maintenance of most components are relatively simple, the fault can be detected and repaired according to the user’s own strength. The terminal manufacturer said it should be noted that only the specified components are allowed to replace the damaged parts.
5. Power must be turned off before repairing or replacing components.
6. Parts (components) removed during overhaul should be replaced in place with the same new parts (components) and fixed with the original specifications screw as far as possible.
7. Instruments used in overhaul must be calibrated.
8. It is strictly forbidden to leave inflammables or metal objects in cabinets or junction boxes.
9. Check the cable and wire regularly to prevent leakage or shock.
In-cabinet maintenance:
Before opening the cabinet door, the main switch of the cabinet should be disconnected.
After the main switch is disconnected, the main switch is still live. Therefore, maintenance personnel must pay special attention to it.
If it is necessary to open the cabinet door electrically for repair, attention should be paid to safety, and no touching of charged objects in the cabinet by hand should be strictly prohibited.
read more
09
Apr
1, poor insulation
The function of the insulator is to keep the contact part in the correct position, and make the contact between the contact part and the complex part. Therefore, the insulation must have excellent electrical properties, mechanical properties and mechanical properties of the... read more
25
Oct
The purchase of automatic wire stripper crimper machine needs to master the skills. There are so many equipment in the market that many people find it is difficult to purchase it. So, how can we know the quality of the wire crimping machine? We... read more
25
Oct
Due to COVID-19 in the first half of the year, the world economy has been greatly disturbed. But here, we hope that you can take care of your own safety and health, and strengthen the epidemic prevention work. No matter how bad the social... read more
17
Jun
What causes bad contact of wire crimping machine? For machines, poor contact has always been one of the main causes of failure, from small mobile phones, large computers, larger end-to-end sub-machines or aviation equipment. Since this problem is so important, we must pay attention to it. Let Fortune Sky wire crimping machine manufacturer analyze the bad contact problem of wire crimping machine today.
For a computer, the most common malfunction is the memory chip. For a wire crimping machine, the most common malfunction is the metal conductor inside the terminal. This part is the core part of the terminal. It transmits the voltage, current or signal from external wires or cables to the contacts corresponding to its matching connectors.
Because of its importance, the wire crimping machine is required to have stable and reliable contact and good conductivity. So what factors will cause poor contact of wire crimping machine contact structure?
In fact, this is a common factor, such as excessive processing size, unreasonable surface treatment technology such as heat treatment and plating, poor storage environment, poor and improper use and operation, etc., may make contact parts and coordination parts of automatic wire crimping machine poor contact.
Common fatal faults at terminals?
1. Poor contact
The metal conductor inside the terminal is the core part of the terminal. It transmits the voltage, current or signal from the external wire or cable to the contacts corresponding to its matching connector. Therefore, the contact parts must have excellent structure, stable and reliable contact retention and good conductivity. Due to the unreasonable structure design, wrong material selection, unstable die, excessive processing size, rough surface, unreasonable surface treatment process such as heat treatment and electroplating, improper assembly, poor storage and use environment and improper operation, all of these will cause poor contact at the contact and coordination parts of the contact parts.
2. Poor insulation
The function of insulator is to keep the contacts in the correct position, and to protect the contacts from the contacts and the shells from each other by insulating the conveyor. Therefore, insulators must have excellent electrical performance, conveyor protection mechanical performance and process forming performance. Especially with the wide use of high density and miniaturized terminals, the effective wall thickness of insulators becomes thinner and thinner. This puts forward more stringent requirements for insulation materials, precision of injection moulds and moulding technology. Due to the existence of metal redundancy, surface dust, flux and other contaminations on the surface or inside of insulators, the amalgamation of organic material precipitates and harmful gas adsorption film with surface water film to form ionic conductive channels, moisture absorption, long mold, aging of insulating materials and other reasons, will cause short circuit, leakage, breakdown, low insulation resistance and other bad insulation phenomena.
3. Poor fixation
Insulators not only play an insulating role, but also provide precise centering and protection for extended contacts. They also have the functions of installation, positioning and locking and fixing on equipment. Poor fixing, light impact on contact reliability, resulting in instantaneous power failure, the serious is product disintegration. Disintegration refers to the abnormal separation between plugs and sockets and between pins and sockets caused by unreliable structure due to material, design, process and other reasons, which will result in serious consequences of power transmission and signal control interruption of computer stripper in control system. Due to unreliable design, wrong material selection, improper selection of forming process, poor quality of heat treatment, die, assembly, welding and other processes, inadequate assembly will cause poor fixation.
In addition, due to coating peeling, corrosion, bruising, plastic shell flying edge, rupture, rough contact parts processing, deformation and other reasons caused by poor appearance, due to positioning and locking with poor size, poor consistency of processing quality, total separation force and other reasons caused by poor interchange, is also a common disease, frequently occurring. These kinds of faults can be found and eliminated in time in the process of inspection and use.
read more
17
Jun
Automatic wire terminal crimping machine is an indispensable equipment for processing all kinds of wires and cables. It is a high-end technical product of multi-function machine for cutting aggregates and feeding materials, stripping, crimping together, humanization and intellectualization. There is hardly any manual work in... read more
12
Jun
1. The main working principle of mechanical type is driving machine working by belt and cam. The advantage is cheap, but the disadvantage is that the mechanical parts are easy to wear and aging after using for a period of time, and the maintenance and debugging are troublesome. Short service life.
2. Stepping full automatic wire crimping machine is mainly driven by stepping motor. Its advantage is that the price is relatively low and the appearance is close to the servo motor. Compared with mechanical design, it is more exquisite. The disadvantage is that domestic ordinary stepping motor is easy to lose step and affects the accuracy of products. The service life is short. The price difference between domestic stepper motor and imported famous brand servo motor is about 10 times. At present, more small companies use stepper motors as servo motors, declare that they are all servo products, or use some unknown servo plus some cam mechanical parts to deceive consumers.
3. Full servo mainly controls the movement of servo motor by servo drive signal provided by PLC. Its advantages are high precision, long service life, high cost performance, and its disadvantage is that the price is relatively expensive. The servo motor, together with imported famous brand reducers such as Shimpo in Japan, Sumitomo, HD, Alpha in Germany, is used together with the motion module (well-known ones such as THK, etc.), which greatly ensures the safety of the servo motor. The accuracy and service life of the product are proved.
The installation steps of automatic wire crimping machine are as follows:
1. Before installing the applicator, need to check whether the upper and lower die blades and feeding fastening screw are tightened or not.
2. Pull up the slider of the applicator and cover the sliding groove into the 2000 mould handle or (insert the power supply, press the adjustment button, rotate the back spindle counterclockwise with an open-mouth wrench, make the press slide down quickly and cover the sliding groove of the applicator into the 2000 mould handle).
3. Fix the bottom plate of the die and the working table of the press with the fixed screw of the press plate, so that the whole set of die can not be loosened (the whole set of die is in a solid state in normal operation).
The wire crimping machine manufacturer introduces the following use steps in details:
4. After the applicator is installed, in the mode of manual... read more
