Mastering Your Ribbon Shearing Machine: Quick Fixes for Common Glitches

Description: Unlock the secrets to a hiccup-free experience with your Automated Ribbon Cutting Equipment. In this guide, we’ll show you how to troubleshoot and conquer the typical issues that may arise with your Ribbon Shearing Machine. Get ready to slice with confidence!


Troubleshooting the Ribbon Shearing Machine: Your Go-To Guide

Welcome to the world of effortless ribbon cutting with our Ribbon Shearing Machine. But what happens when the unexpected strikes? Fear not, as we’ve got you covered with quick solutions to common glitches:

1. When Heat Cutting Fails:

  • Check if the temperature matches your preset value.
  • Ensure the hot knife is heating up as it should.

2. Power Supply Woes:

  • Verify the power connection plug for a solid connection.
  • Don’t forget to check the fuse; a disconnected one can be the culprit.

3. The Unresponsive Machine:

  • If it won’t start, investigate the cylinder’s ventilation, and open the valve if needed.
  • Keep an eye out for sensor errors.
  • Check the cutter seat’s sliding sleeve; lubricate if it’s stuck.

4. Rotary Knife Sensor Issues:

  • Check for air pressure and ensure the punching frame isn’t jammed.
  • Inspect the rotary knife sensor’s baffle; it shouldn’t be off-kilter or stuck.
  • Verify the drive board’s fuse isn’t blown.

5. Blank Screen Woes:

  • Examine the transformer output for power or loose sockets.

6. Length Discrepancies:

  • Adjust the roller’s tension or use a belt conveyor for smoother feeding.
  • Activate the compensation function for precise cuts.

7. Color Mark Sensor Quirks:

  • Follow these steps to set the color mark sensor: a. Measure and confirm the trademark length. b. Enter the length into the computer settings. c. Fix the sensor on the rail and connect the socket. d. Align the cutting line with the blade. e. Adjust the light beam to form a clear “1” shape. f. Calibrate the sensor by turning the switches and focusing the light on the background color of the trademark.

8. Electric Shock Concerns:

  • Ensure you have an electric shock-proof leakage switch during installation.
  • Properly ground the three-pin socket for safe operation.

9. Material Alarm Troubles:

  • Replace materials if they’ve run out.
  • Check if materials are loaded correctly and that the pressure plate is in place.
  • Investigate the travel switch for any obstructions.

Your Ribbon Shearing Machine is designed to simplify your work, and with these troubleshooting tips, you’ll keep it running smoothly. No more mysteries, just efficient cutting!


Note: Regular maintenance and proper setup are key to enjoying a glitch-free experience with your Ribbon Shearing Machine. Always prioritize safety and follow manufacturer guidelines.

Share this post


Online Service
Live Chat