Analysis on the problem of poor contact of FRC wire tin dipping machine

For machines, poor contact has always been one of the main causes of failure, ranging from mobile phones, computers, to wire tin dipping machines, aviation equipment, etc. Since this problem is so important, of course, we need to pay attention to it. Today, let’s analyze the problem of poor contact of wire tin dipping machine. For the computer, the memory module is the most common cause of poor contact, while for the wire tin dipping machine, the metal conductor inside [...]

Precautions in using fully automatic cut strip twist wire dip tin machine

Let’s analyze how to solve the following two kinds of faults in using fully automatic cut strip twist wire dip tin machine: The fully automatic wire tin dip soldering machine is weak. When feeding, user feels that the wire cutting machine is unable to operate and the cut wires are not in order. At this time, we need to increase the power, adjust the motor or tighten the screws. When the fully automatic cut strip twist wire dip tin machine is working, it suddenly [...]

The cleaning work in the furnace of fully automatic wire tin dip soldering machine should be done regularly

Good maintenance will not only increase the service life of the machine, but also make the machine run faster, and there will be fewer problems in the later work. Next, will teach you how to maintain the fully automatic wire tin dip soldering machine: When choosing a proper fully automatic wire tin dip soldering machine, first of all, the power and type of fully automatic wire tin dip soldering machine should be considered. This is because the specifications of fully automatic wire tin dip soldering [...]

Working principle of main parts of automatic wire cutting and tin dip soldering machine

1. Wire wheel: conveying wire rod and stripping wire head. When stripping short wires, the wire cutting machine can strip both the wire head and the wire tail (the length of the wire is less than 50 mm). When stripping in the process of stripping, the wire cutting machine has the function of stripping the middle part as well as the wire head. 2. Outgoing line wheel: it is used to transport wire rod and strip the outgoing line tail [...]

What are the main factors affect the quality of ribbon cable wire tin dip soldering machine

Every kind of mechanical equipment has a quality evaluation method. If you want to evaluate its quality, the most common is whether the performance is stable, whether there is a fault in the use process, whether the use operation is safe and so on. Automatic wire tin dip soldering machine is also a kind of mechanical equipment, and it is automatic. Its quality is related to the efficiency and effect of wire processing. Every customer wants to buy a [...]

The reason why the soldering iron head doesn’t stain tin

Electric iron head does not stain tin. People who often use electric iron head at work will always suffer from this? So what’s the reason why the tip of the soldering iron doesn’t stick to tin? In the process of lead-free soldering, sometimes the soldering iron head does not stick to tin. In addition to the quality problems of the iron head itself, the manufacturer of automatic wire cutting and tin dip soldering machine thinks that the causes can [...]

Common problems of automatic cutting stripping and wire tin dip soldering machine

Wire stripping machine is a kind of machine which can strip the insulation of wire. Due to the different wire diameter, material and composition, there are different suitable models. Wire stripping machine is the most widely used machine in the mechanical industry. People are relying on various mechanical automation in many places. Here are some common problems of automatic cutting stripping and  wire tin dip soldering machine: A. wire insulation crush 1. Properly adjust the gap between the incoming transmission wheel and [...]

Online Service
Live Chat