Tubular Terminal Stripping Blade Problems? Fix It Fast!

I. Causes of the Problem

The reason your tubular terminal crimping machine‘s stripping blade might not be right could be due to a mismatch with the machine model or the blade being worn out. These issues will affect the stripping result and, consequently, your work efficiency.

II. Solutions

Replace the stripping blade

If the stripping blade is worn, you need to replace it with a new one. When doing so, choose a blade that matches the model of your tubular terminal machine to ensure it works correctly.

Adjust the position of the stripping blade

If the stripping blade is in the wrong position, it will also lead to improper stripping. In this case, you need to readjust the blade to the correct position.

Replace the tubular terminal machine

If the methods above don’t solve the problem, it might be because the machine model is mismatched. In this case, you need to replace it with a suitable tubular terminal machine.

III. Precautions
When dealing with issues related to the stripping blade of your tubular terminal machine, you need to pay attention to the following:

Choose a suitable stripping blade

When replacing the stripping blade, you must choose one that matches the model of the tubular terminal machine to ensure it works correctly.

Adjust to the correct position

If the stripping blade is in the wrong position, you need to readjust it to the correct position.

Pay attention to safety

When replacing or adjusting the stripping blade, you need to be careful to avoid accidents.

In conclusion, fixing the problem of an unsuitable stripping blade on your tubular terminal machine is not difficult. You just need to choose a suitable stripping blade or the correct machine and adjust the blade to the right position. I hope this article was helpful to you.