Wire Cutter Stripping Machine: Max Performance! Easy Guide

Wire Cutter & Stripping Machine: Max Performance! Easy Guide

By fortunesky Technical Support wire stripping cutter

Wire Cutter & Stripping Machine: Max Performance! Easy Guide

Understanding the parameter settings of your automatic line knife and stripping machine is pivotal for effective operation. This companion walks you through the essential settings for speed, affair, line wringing, and more.

Wire Stripping Parameters

penetrating Settings With the machine idle( not recycling cables), press the” Twisting Setting” button. The display will show a flashing” Front Length” parameter.

Inputting Values Use the buttons to directly enter the asked values.However, press” Clear” and re-up the correct value, If you make a mistake. Eventually, confirm the setting by pressing” Confirm.” This process repeats for all parameters, including

Front Length
Front Half– Stripping Length
Total Length
reverse Half– Stripping Length
reverse Length
Blade Value
Knife Retreat
Navigation Use the” ←” and” →” buttons to move between flashing parameters. Press” Cancel” at any time to exit the settings and return to idle mode.

Wire Stripping Speed

penetrating Settings In idle mode, press the” Speed Setting” button. The display will show a flashing” Cutting Speed” parameter.

Inputting Values analogous to line stripping parameters, use the buttons to enter asked speed values, confirm with” Confirm,” and clear miscalculations with” Clear.” The malleable speed parameters include

Cutting Speed
line Feeding Speed
line Stripping Speed
Pause Time
Navigation Use the” ←” and” →” buttons to navigate parameters and” Cancel” to exit settings and return to idle mode.

Affair Settings

penetrating Settings While this automatic wire stripper is idle, press the” Speed Setting” button. The display will show a flashing” Total volume” parameter.

Inputting Values Enter the asked affair volume using the buttons. Confirm with” Confirm” and clear crimes with” Clear.” This process sets both the total volume and the setting number.

Navigation Use the” ←” and” →” buttons to navigate parameters and” Cancel” to exit settings and return to idle mode.

Wringing Settings

penetrating Settings In idle mode, press the” Twisting Setting” button. The display will show a flashing” Front- End Twisting Mode.”

Inputting Values Use the” ↑” and” ↓” buttons to elect the asked wringing mode and confirm with” Confirm.” Repeat this process to set

Front- End Twisting Mode
Rear- End Twisting Mode
Twisting Speed
Twisting Strength
Navigation Use the” ←” and” →” buttons to navigate parameters and” Cancel” to exit settings and return to idle mode.

Program Number Settings

penetrating Settings In idle mode, press the” Program” button. The display will show a flashing” Program Number” parameter.

Inputting Values Enter the asked program number using the buttons. Confirm with” Confirm” to save and return to idle mode.

Conclusion

This companion provides a introductory overview of parameter settings for your automatic line knife and stripping machine. For farther questions, feel free to communicate us also, explore their website for information on other line harness processing outfit.