Welding Cable Cutter Stripper: Setting and Adjustment Methods
I. Adjustment of Stripping Depth
Stripping depth is one of the most critical parameters in fully automatic wire cutting and stripping machines, directly affecting the quality of stripping. Therefore, it needs to be adjusted during the stripping process.
Manual Adjustment Method: The stripping depth adjustment device on the wire stripping machine typically features symbols “+” and “-“, representing deepening and shallowing of the stripping depth, respectively. Adjustments should be made according to different wire diameters and materials to achieve the optimal stripping depth.
Automatic Adjustment Method: Most modern fully automatic wire cutting and stripping machines are equipped with automatic adjustment functionality. When the machine detects changes in wire diameter or material, it automatically adjusts the stripping depth to ensure stable stripping quality.
II. Control of Stripping Speed
Stripping speed is also a factor affecting stripping quality. Faster stripping speeds can result in uneven stripping and irregularities, while slower speeds can decrease stripping efficiency.
Control of stripping speed can be achieved by adjusting the speed controller on the wire stripping machine. Generally, appropriate stripping speed should be selected based on wire diameter and material, followed by fine-tuning to achieve the best stripping results.
III. Replacement of Stripping Blades
Stripping blades are among the most susceptible parts to wear in wire stripping machines, directly impacting stripping quality. Therefore, it’s necessary to regularly replace stripping blades to ensure effective stripping.
The method for replacing stripping blades typically involves the following steps:
Turn off the power and unplug the power plug after the wire stripping machine stops automatically.
Locate the position of the stripping blades and use a wrench to loosen the fixing screws.
Remove the old stripping blade and install the new one.
Use a wrench to tighten the fixing screws for the stripping blade.
Plug in the power plug, restart the wire stripping machine, and conduct a stripping test.
Conclusion
By following the above methods, you can master the setting and adjustment of welding cable cutter and stripper, thereby enhancing the efficiency and quality of wire stripping. It’s worth noting that there may be some differences in wire stripping machines from different manufacturers and models, so it’s important to carefully read the instructions to avoid improper operation.
