Operation process of automatic cutter stripper wire crimpers

1. Turn on the power switch of the automatic cutter stripper wire crimpers, and the power indicator is on. 2. Pay attention to whether there is obvious abnormal noise inside and outside the machine. If yes, immediately stop working, ask the maintenance personnel to determine whether it is necessary to repair. 3. Applicator selection and installation: it is necessary to compare whether the selected blade is matched or not before installing the applicator. The tool can be loaded only after the [...]

Failure Elimination For Automatic Wire Terminating Machine

Failure 1: Stripping front opening length varies. Reason a: Feeding wire wheel is too tight or relaxed; Solution: use wheel trimming bar to adjust two wheels gap so as not to press the wire firmly or too relaxed to slip the wire. Reason b: cutting and stripping knife cut too shallow or too deep; Solution: use knife deep shallow adjust bar to move knife-edge to the appropriate location, in order not to hurt the copper wire and can smooth off the rubber. Reason c: [...]

Online Service
Live Chat