Fully Automatic Gold Plated Contact Wire Lug Crimping Machine

full automatic terminal crimping machine operating procedures

Shenzhen Fortune Sky Technology Co.,Ltd tell you the full automatic terminal crimping machine operating procedures 3.1 Checking full automatic terminal crimping machine before its start : 3.1.1 check whether the switch is good. 3.1.2 check the electrical device is normal (Power: 220V, air pressure: 3.5-6.5 pure) 3.1.3 Lubricate in the sliding part, clean the machine and keep maintenance records 3.2 fully automatic terminal crimping machine operation steps: 3.2.1 place semi-finished products that inserted into the terminal on the table to be pressed. 3.2.2 will be stamping [...]

cable lug terminal crimping machine

What are the common fatal faults of the lug/terminal/ferrule?

What are the common fatal faults of the lug/terminal/ferrule? 1, poor insulation The function of the insulator is to keep the contact part in the correct position, and make the contact between the contact part and the complex part. Therefore, the insulation must have excellent electrical properties, mechanical properties and mechanical properties of the conveyor molding. Especially with the high density, the miniaturization of the wide use of terminals, the effective wall thickness of the insulator thinner and thinner. It puts [...]

cable lug terminal crimping machine

Dealing with the common problems of semi automatic terminal crimping machine

Dealing with the common problems of semi automatic terminal crimping machine Generally speaking, semi automatic terminal crimping machine in normal work, there are several common problems. One is the poor contact terminals and insulation, as well as poor fixed. 1.) the phenomenon of poor contact The metal conductor inside the terminal is the core part of the terminal, which transfers the voltage, current or signal from the external wire or cable to the corresponding contact part of the connector. Therefore, the structure [...]

Fully Automatic Gold Plated Contact Wire Lug Crimping Machine

Full Digital Intelligent Terminal Crimping Machine Failure Elimination

Full Digital Intelligent Terminal Crimping Machine Failure Elimination Failure 1: Stripping front opening length varies. Reason a: Feeding wire wheel is too tight or relaxed; Solution: use wheel trimming bar to adjust two wheels gap so as not to press the wire firmly or too relaxed to slip the wire. Reason b: cutting and stripping knife cut too shallow or too deep; Solution: use knife deep shallow adjust bar to move knife-edge to the appropriate location, in order not to hurt the copper wire [...]