Automatic 2 Core Flat Cable Cutting Stripping Twisting Machine Operating Procedures
Before powering on, check whether all parts of the machine are in good condition, and ensure that the power cord is properly connected to ensure the machine is in good working order.
Place the wires to be processed into the feeding trough of the wire stripping machine, ensuring that the wires are placed securely.
Adjust the stripping length and thickness of the wire stripping machine according to the type and specifications of the wire, ensuring that the stripping length and thickness meet the requirements.
Turn on the power switch of the wire stripping machine, wait for the machine to preheat, and then press the start button to begin the stripping operation.
During the stripping process, pay attention to the stripping condition of the wires, and stop the machine for inspection and handling if any abnormalities are found.
After completing the stripping operation, press the stop button, turn off the power of the wire stripping machine, clean the machine, and store it properly.
Pay attention to safety during operation to prevent fingers or other objects from entering the machine, causing injury.
