Unveiling the Inner Workings of Wire Twisting and Tinning Equipment

Are you curious about the magic behind your Wire Twisting and Tinning Equipment? Let’s dive into the intriguing world of its main components:

1. Wire Wheel Wonder: This part is the unsung hero, responsible for smoothly conveying wire rods and performing the art of wire head stripping. But wait, there’s more! For short wires (less than 50 mm), it doesn’t stop at just the head; it can strip the tail too. It’s like the Swiss Army knife of wire cutters!
2. Outgoing Line Wheel: Need to transport wire rods and strip outgoing line tails? This wheel’s got your back. It’s especially handy when dealing with shorter wires, where the stripping machine takes a back seat. Just remember to put the “outlet wheel lifting knob” in the “U” position.
3. Clearance Control Master: The adjustment knob for the incoming wire wheel’s clearance is your precision tool. Crank it up to increase the clearance upwards, and dial it down to decrease it. It’s all about adapting to your wire’s thickness.
4. Pressure Maestro: Say hello to the pressure adjustment knob for the incoming wheel. Crank it clockwise, and the pressure increases; go anticlockwise, and it decreases. It’s like your wire’s personal masseuse.
5. Wire Feed Wheel Magician: Need to thread the wire smoothly? Raise the wire feed wheel by turning the knob clockwise. When it’s showtime, lower the wheel by going anticlockwise. It’s like a conductor for your wire orchestra.
6. Clearance Control Guru: The outgoing line pulley’s clearance is crucial, and this knob is your control center. Turn it up to increase clearance and down to decrease it, depending on your wire’s thickness.
7. Outlet Wheel Pressure Pro: Adjust the outlet wheel pressure with ease. Counterclockwise increases it, and clockwise reduces it. Precision at your fingertips!
8. Outlet Wheel Lifter: When it’s time to gracefully extract the wire, lift the outlet wheel with a twist of the knob. Anticlockwise for the lift, clockwise for the descent. Wire handling made elegant.
9. Tool Holder Extraordinaire: Last but not least, the tool holder assembly, the heart of the wire stripper. It wields the power to cut wire rods, strip heads and tails. When the machine takes a break, open the upper and lower blades to their max for a smooth wire passage.

The Wire Twisting and Tinning Equipment is like a symphony conductor for your wire operations, and now, you know how the magic happens behind the scenes. Get ready to orchestrate your wire processing masterpiece!