Automatic wire cutting and stripping machine with shortest insulation length for AWG16 to AWG32 wires with shortest insulation length for AWG16 to AWG32 wires
Automatic wire cutting and stripping machine with shortest insulation length for AWG16 to AWG32 wires
The parameter settings of the fully automatic computerized wire stripping machine are essential knowledge for personnel in every enterprise to master. These settings mainly include: speed, output, wire twisting, and more. Failing to grasp the method of parameter setting well will hinder the machine from performing its functions effectively. Today, Xiongsheng Electronic Equipment shares a comprehensive guide on the parameter settings of the fully automatic computerized wire stripping machine.
Wire Stripping Parameter Settings:
When the machine is idle (without cutting wire), press the “Twisting Setting” button. The front length parameter starts flashing. You can directly input numbers at this time. If there is an input error, press the “Clear” button to clear the input numbers and then re-enter. Then press the “Confirm” button to save, and the next parameter will flash until all parameters including front length, front half-stripping, total length, rear half-stripping, rear length, blade value, and knife retreat are entered.
During parameter setting, press the “←” button to move the flashing parameter one item to the left, and press the “→” button to move the flashing parameter one item to the right. You can press “Cancel” at any time to exit the parameter setting and return to the idle state.
Wire Stripping Speed Setting:
When the machine is idle (without cutting wire), press the “Speed Setting” button. The cutting speed parameter starts flashing. You can directly input numbers at this time. If there is an input error, press the “Clear” button to clear the input numbers and then re-enter. Then press the “Confirm” button to save, and the next parameter will flash until all parameters including cutting speed, wire feeding speed, wire stripping speed, and pause time are entered.
During parameter setting, press the “←” button to move the flashing parameter one item to the left, and press the “→” button to move the flashing parameter one item to the right. You can press “Cancel” at any time to exit the parameter setting and return to the idle state.
Output Setting:
When the machine is idle (without cutting wire), press the “Speed Setting” button. The total quantity parameter starts flashing. You can directly input numbers at this time. If there is an input error, press the “Clear” button to clear the input numbers and then re-enter. Then press the “Confirm” button to save, and the next parameter will flash until the total quantity and setting number are entered.
During parameter setting, press the “←” button to move the flashing parameter one item to the left, and press the “→” button to move the flashing parameter one item to the right. You can press “Cancel” at any time to exit the parameter setting and return to the idle state.
Twisting Setting:
When the machine is idle (without cutting wire), press the “Twisting Setting” button. The front-end twisting mode flashes. Press the “↑” and “↓” buttons to switch, then press the “Confirm” button to save. The next parameter will flash until the front-end twisting mode, rear-end twisting mode, twisting speed, and twisting strength are entered using the same method as above.
During parameter setting, press the “←” button to move the flashing parameter one item to the left, and press the “→” button to move the flashing parameter one item to the right. You can press “Cancel” at any time to exit the parameter setting and return to the idle state.
Program Number Setting:
When the machine is idle (without cutting wire), press the “Program” button. The program number parameter starts flashing. You can directly input numbers at this time. If there is an input error, press the “Clear” button to clear the input numbers and then re-enter. Then press the “Confirm” button to save and return to the idle state.
This concludes the sharing on the parameter settings of the fully automatic computerized wire stripping machine. If you still have any questions, feel free to contact us directly, and we will solve them for you promptly. If you have any questions about other wire harness processing equipment such as coaxial cable stripping machines or fully automatic terminal machines, you can refer to other articles on our website.
