Causes of Abnormalities in Fully Automatic Ribbon Cable Single-Head Crimping Machines
When a fully automatic ribbon cable single-head crimping machine is in operation and malfunctions or abnormalities occur, it is crucial to immediately stop and inspect for repairs. Working with a malfunctioning machine may lead to significant losses such as mechanical jams or motor burnouts. Regularly check whether all components of the machine are working properly and if there are any loose connections or fasteners. The choice of whether a certain type of terminal requires a fully automatic crimping machine depends on its characteristics, specifically, if it can join terminals without external force. The maintenance of fully automatic crimping machines is not difficult, but it requires attention to detail and patience. To achieve effective maintenance, each maintenance task must be performed diligently. Regular inspections are essential to identify defects within the machine, such as component wear or solidification of lubricating oil. Only through thorough checks can safety risks be reasonably minimized.
Causes of Malfunctions in Fully Automatic Ribbon Cable Single-Head Crimping Machines
Begin by checking if the gun-type swing arm guide is connected to the wire, then inspect whether the terminal blade aligns correctly with the swing arm guide. Additionally, ensure that the terminal auxiliary pressure block is not loose, and finally, check if there is any change in the distance between terminals. After a series of checks, the root cause of the malfunction can be identified. To verify tensile strength, perform a test using scrap cable after adjusting the machine. Follow the specific steps outlined in the “Tensile Test Table.” The key reference values for the tensile strength test can be found in the table. It is essential to perform a pressing tensile test after setting up the machine correctly. The automatic wire stripping machine is an indispensable equipment for wire processing. It can press the top of the metal wire into the wire end and then cut the wire. The function of the automatic wire stripping machine is to facilitate the connection of wires or transmission lines throughout the connection process, eliminating the complexity of welding required to connect two transmission lines. It can be unplugged immediately after use.
