Analysis of Crimping Applicator of Wire Crimping Machine Tuning Methods

Tuning Methods for Crimping Applicators of Wire Crimping Machine

Adjustment of Wire Clamping Strength

Loosen and fasten the bolts.
Adjust the clamping strength by turning the bolts:
Rotating in the X direction: Decreases clamping strength.
Rotating in the Y direction: Provides slight tension to the wire.
Secure the adjustment bolts with fixed bolts.
Confirmation of Blade Installation

Ensure the correct installation sequence of each blade.
Adjust the blade insertion depth:
After tightening the screws, rotate the blade adjustment screw to adjust the insertion depth:
Rotating in the X direction: Decreases insertion depth.
Rotating in the Y direction: Increases insertion depth.
Adjustment of the feeding terminal position:

Manually rotate the camshaft of the stripping part to retract the slider to the maximum extent.
Manually rotate the terminal shaft to confirm if the wire end is fed to the correct position.
If the feeding position is not appropriate, adjust the feeding terminal position by adjusting the feeding terminal micro-adjustment rod of the pressure tool.
Adjust the crimping height, stripping position, remove the stripping debris, and maintain the terminal mold (omitted).