Automatic Rope Wire Cable Seal Cutting Annealing Machine
- Description
- Inquiry
Description
Main technical requirements and instructions
1. The wire rope of the wire rope having a diameter of 1-5mm which can be completed by the fuse machine. The equipment adopts the stepper motor （8mm above adopt servo motor） to ensure the fuse length is accurate, the melting section is conical, the largest circular surface diameter of the conical surface is smaller than the diameter of the steel wire, and the melting section is not scattered.it is quick and convenient to change the fuse length by using the touch screen.
2. Size requirements for wire rope and fuse:
-The fuse material is a wire rope with no cotton inside.
-The wire rope diameter is required to be 1-5mm （requires replacement of the clamping die）.
-The maximum wire diameter that can be blown is 5mm and the length is not limited. (If larger diameter material processing is required, it needs to be customized separately).
-The fuse length size can be touched on the touch screen by the “Total Length “display box, pop-up digital setting keyboard and the length can be set arbitrarily.
-Wire break accuracy is approximately +/-0.060inch- +/-0.500inch.
3. Feature:
