Technical Parameters:
Product Name: Automatic Wire Threading Stripping Ferrule Crimping Machine
Rated Power Supply: AC220V 50/60Hz
Air Source: 0.6-0.8Mpa (The pressure of the dry air inlet must be maintained at no less than 0.6 MPa.)
Control Method: Human-machine interface,Electronic control,Pneumatic control
Running Way: Automatic trigger,Manual operation
Suitable wires: Suitable for BVR wires 0.3, 0.5, 0.75, 1.0, 1.5, 2.5, 4.0, 6.0 square mm
Net Weight: around 60kg
Dimension: 350x450x400mm
Terminal Specifications: Terminal insulation length is within 7.5mm,Conductor length is within 12mm.
Crimping Shapes: Quadrilateral, Hexagon custom shapes available
To replace the product, follow these steps: manually replace the corresponding fixtures, adjust the vibration plate, and perform the electric memory adjustment.
Production Capacity: 2.5 seconds per wire (considered a single machine cycle)
The machine performs two inspection items: terminal presence detection and right-side safety door open detection.
The operating temperature of the machine is 10-25 degrees Celsius, so it should be used in a room where the temperature is within this range.
The operating humidity of the machine is 30-80%RH, so it should be used in a room where the humidity level is within this range and there is no condensation.
